Accessories

Switch Handles

The VS-C1502 switch handle assembly incorporates the use of a heavy duty trigger type switch for actuation of the tool, and a short conductor cord with a quick release connector to attach it to the main conductor run from the power unit in question. Produced in Aluminum alloy for high strength, with a profiled pistol grip for comfort, the handle incorporates an integral trigger guard for safety.An alternate handle, the VS-C1591 can be used with the V-10shear only when the tool is not suspended from a balancer.

Hot Cut Extension Nipple Adapters

When it is necessary to cut coiled stock at elevated temperatures, it is recommended for the safety and comfort of the operator that the hot cut extension nipple adapter is used. The extension allows the operator to actuate the too From approximately 36” from the cut. The extension also comes equipped with an auxiliary and adjustable hand grip, which aids in the easy manipulation of the tool

Shear Guards

The shear guard provides a means of protecting the operator against possible injury to hands or fingers by completely enclosing the opening between the blades. The shearing of rod or bar can easily be accomplished by simply applying a slight pressure to the front of the guard, allowing the material to slide into position between the shear blades. After the cut has been accomplished the shear guard will automatically return to its original position by means of a return spring. Use of guards is recommended on all tools.